Demo, free audit & pricing

See what we would find in your buildings before you pay us anything.

A 30-minute consultation on your own portfolio, a free read of your last twelve months of utility bills, and tiered pricing you can start small on.

The demo runs on your data, not a slide deck.

01

A 30-minute consultation

We go through your portfolio, your tariffs, the systems you run, and where you already suspect money is leaking. You talk to the founders, not an SDR.

02

We connect a few of your sites

Utility bills and interval meter data to start, your building management system if you want to go further. No new hardware and no rip-and-replace.

03

You see what it caught

In the first week we walk you through the waste Edviro found in your own buildings, what it's worth a year, and which fixes we would run first.

The usual consultation

An engineer walks the building for a week, hands over a PDF of recommendations, and invoices. The findings start going stale the day schedules change, and nobody verifies the fixes that did get made.

Consulting with Edviro

The audit never stops. Edviro re-reads every bill and every interval, catches drift the week it starts, hands your team the fix, and confirms the savings in the meter data. You get the engineering judgment on the call and the monitoring in between.

Free bill audit

Send us twelve months of bills. We will tell you what is recoverable.

What you send

Twelve months of utility bills as PDFs, or a utility data-sharing connection such as PG&E Share My Data. That is the whole ask. Nothing to install, and no access to your control system.

Email us your bills

What you get back

  • Where usage stops lining up with how the building is actually used, at night, on weekends, and over breaks.
  • What demand charges are costing you, and how much of that is spikes you could shift.
  • Billing and tariff problems: misapplied line items, and whether your load belongs on a different rate schedule.
  • An estimate of annual recoverable spend, with the fixes ranked by what pays back first.

It costs nothing and it is yours to keep, whether or not you buy anything.

Pricing

Pay for the part you are actually using.

Three tiers, priced by the sites you connect. Start where the pain is and add the next tier when the last one has paid for itself.

Tier 1

Visibility

For teams flying blind between monthly bills.

  • One live model per site from bills, meters, weather, and tariffs
  • Continuous audit that flags drift, anomalies, and waste as it starts
  • Billing and tariff error detection on every statement
  • Weekly briefing and benchmarking across your portfolio

Quoted per connected site

Tier 2

Operations

For teams who want the fix, not another dashboard.

  • Everything in Visibility
  • Building management system, sensor, and work-order integration
  • Guided work orders with the step-by-step fix
  • Schedule and setpoint optimization, tested before it ships
  • Demand-charge management ahead of a peak

Quoted per connected site

Tier 3

Capital & M&V

For budget season, bond measures, and proving what you saved.

  • Everything in Operations
  • A digital twin of each building
  • Intervention simulation before you spend
  • Capital projects ranked by modeled payback
  • Audit-grade M&V against a learned baseline

Quoted per connected site

What you will not get

Energy software has a habit of selling you a catalog and letting you sort out which half you needed.

No module maze

Nothing is bundled, and no module exists only to unlock the one you wanted.

No per-seat counting

Pricing follows sites, not headcount, so adding a maintenance tech costs nothing.

No install project first

No hardware order and no rip-and-replace before you see a single finding.

No unverifiable savings

Every tier reports against a learned baseline, so the savings show up on the bill.

Before you book

Demo and pricing FAQ

What actually happens on the demo call?
Thirty minutes with the founders, run against your data rather than a slide deck. We go through your portfolio, your tariffs, and the systems you run, then connect a few of your sites and show you what Edviro catches in the first week.
Is the bill audit really free?
Yes. Send twelve months of utility bills, or set up a utility data-sharing connection, and we hand back an estimate of what is recoverable and which fixes pay back first. There is no software to install, no access to your control system, and no commitment.
How much does Edviro cost?
Pricing depends on your portfolio, how many sites you connect, and which tier you start at. The free bill audit comes first, so by the time we quote you can see the recoverable spend sitting next to the price.
Do we have to buy every tier?
No. The tiers stack, so you start where the pain is and add the next one when the last has paid for itself. Nothing is bundled, and there is no module you have to buy to unlock the one you wanted.
Do we need new hardware or a new building management system?
No. Edviro is software that sits on top of what you already have. It connects to your meters, building management system, sensors, and utility data without ripping anything out.
Can we start with a single site?
Yes. Most teams connect a few sites, see what Edviro finds in the first week, then expand. To date Edviro has saved clients over $400K, with 7 school sites live and 29 more expanding.

Book the thirty minutes.

Bring a utility bill. We will show you what Edviro finds in your own buildings, and what it costs to keep finding it.