For data center operators
Noise to signal.
Edviro connects to your telemetry feeds and watches for issues 24/7. We turn noisy alarms, alerts, and charts into a short list your operators can actually act on.
In practice
312 alarms. One real problem.
Your controls already tell you a lot. The hard part is knowing which alarm matters. We do that sorting so your team spends time fixing, not scrolling.
BMS, EPMS, PDU and sensor feeds you already have. Hundreds of alarms a day, most of them noise.
We tie related alarms together and point to the likely cause, with the evidence attached.
Your operators get a short list of what to fix. Nothing goes out until someone approves it.
Physics models
Models that learn how your site runs.
We fit a physics model to your own telemetry and keep it calibrated as load and layout change. Then you can ask it questions before you touch the floor.
- How many more racks can Pod 3 take before cooling runs out?
- If CRAH-2 goes down, which rows go over the inlet limit, and how fast?
- Can we raise supply air a degree without creating hot spots?
- Why does row C run hot every afternoon?
How it runs
One continuous loop.
Every fix makes the model a little sharper. Over time the site runs tighter and wastes less.
Questions from operators
Data center FAQ
What data does Edviro need?
Whatever your controls already export: BMS points and alarms, EPMS and PDU power, cooling plant data, and environmental sensors. Nothing new gets installed and access is read-only.
We already have a DCIM and a BMS. Why add this?
Those systems collect the data and fire the alarms. Edviro sits on top, figures out which alarms actually matter, and turns them into work your team can act on.
What are the physics models for?
Asking "what if" before you try it on the live floor. Cooling headroom, a unit failing, a setpoint change, a new row of high-density racks. The model is calibrated to your site and we show you how accurate it is.
Does Edviro control the cooling plant?
No. Edviro reads, diagnoses, and simulates. Any change to the floor or the plant stays with your team and your vendors.
See what Edviro finds in your buildings.
Connect your sites. Find the problems. Close the loop.